25 quadrant runs later: A scaling and voltage comparison
This could have been a lot more exhaustive...and i know some people are doing far more extreme things than i on both the upper and lower ends of voltage and frequency, but this was really just for piece of mind for myself and i thought i would share.
UULV:
1000mhz-56vsel
800mhz-52vsel
500mhz-42vsel
300mhz-27vsel
Stock:
1000mhz-62vsel
800mhz-58vsel
500mhz-48vsel
300mhz (manually set for consistency) -33vsel
movie mode (i play lots of movies over HDMI at my GF's, this setting is just to ensure solid playback.)
1200mhz-64vsel
rest same as stock
I did not discard any outliers, these scores are all sequential. The purpose of this was to see if i could detecting any throttling due to voltage starvation at my uulv setting. My benchmark scores are a little erratic at 1.1ghz 58vsel and very erratic at 1.15ghz 58vsel. i get tremendous battery life at 1ghz 58vsel, so i thought i'd try and take it a little bit further.
This could have been a lot more exhaustive...and i know some people are doing far more extreme things than i on both the upper and lower ends of voltage and frequency, but this was really just for piece of mind for myself and i thought i would share.
UULV:
1000mhz-56vsel
800mhz-52vsel
500mhz-42vsel
300mhz-27vsel
Stock:
1000mhz-62vsel
800mhz-58vsel
500mhz-48vsel
300mhz (manually set for consistency) -33vsel
movie mode (i play lots of movies over HDMI at my GF's, this setting is just to ensure solid playback.)
1200mhz-64vsel
rest same as stock
I did not discard any outliers, these scores are all sequential. The purpose of this was to see if i could detecting any throttling due to voltage starvation at my uulv setting. My benchmark scores are a little erratic at 1.1ghz 58vsel and very erratic at 1.15ghz 58vsel. i get tremendous battery life at 1ghz 58vsel, so i thought i'd try and take it a little bit further.