[8-2-2012] .906 to. 890 SBF *UPDATED* .exe
YOU MUST BE ON .906 OTA TO USE THIS
**If you are on .890 ota please download and use this file>>D3.SBF.890.ZIP (flash via rsdlite)**
Sence .906 was introduced the previous .890 SBF would not work. The following is a SBF that was created by extracting some files
(boot.img, cdt.bin, mbm.bin, mbmloader_hs.bin, recovery.img) from the .906 ota and placing them in the original .890 SBF file
which now makes it possible for us to SBF back from .906 to .890.
I created a 1-click-sbf.exe to make flashing as simple as possible. The exe when ran will extract files to a temp dir (if needed)
to make it easy for you to delete manually or most window cleaners will clean the temp folder. thus you don't have to
have that much room taken up on your hard drive all the time..when you start the exe it will check the temp folder to see if
the files still remain..if they do it will not need to extract the files thus starting much quicker!
I am not responsible if you brick your phone while using this!
It has been tested and confirmed working...
1-Click .EXE Method:
Download:HERE
PLEASE DONT FORGET TO CLICK THE LITTLE LIKE BUTTON...
1. Download the above file to computer
2. Get a beer
3. If you have a spare battery, or the current battery, make sure it's charged above 50%
(quick unbrick wont run if it's below 50%)
4. When the phone is off, press m+power and scroll down to AP Fastboot.
5. Plug the phone into the computer, make sure you get the USB connected message on the phone.
6. Run the "1_CLICK_SBF.exe" (win 7 users right click on .exe and run as administrator)
7. Let your phone restore and boot.
8. Finish that beer your done..wasn't that easy..
*NOTE:
Once you have successfully sbf'd you will have to reinstall the .906 ota. you can accomplish this one of 2 ways
1. Go to settings/about phone/system updates and follow the steps
2. Download the update from this thread push it to your EXTERNAL sdcard boot your phone into STOCK recovery pwr+x choose install update
====================
[OFFICIAL UPDATE] VZW DROID 3 OFFICIAL 5.7.906 Update
Download: HERE
MOTOFAIL ROOT TOOL ( this is also a 1_click .exe... )
Download: HERE
NEW! SAFESTRAP v3 for DROID 3
Download v3.05 [ 2012-10-17 ]
md5sum: 39b1cd260e00d5d73faa7f27b7e31d25
SAFESTRAP (TWEAKED) v1.08e RECOVERY (NON-KEXEC)
Download:HERE
====================
tomsgt has put together some nice videos on acomplishing all of this. they can be found here:
http://forum.xda-developers.com/showthread.php?t=1872206
====================
Credits:
Q9nap
Hashcode
Redsox985
Psouza4
droidian1441
Ovelayer
PLEASE DONT FORGET TO CLICK THE LITTLE LIKE BUTTON...
YOU MAY NOT COPY OR RE-POST OUR WORK WITHOUT PERMISSION
YOU MUST BE ON .906 OTA TO USE THIS
**If you are on .890 ota please download and use this file>>D3.SBF.890.ZIP (flash via rsdlite)**
Sence .906 was introduced the previous .890 SBF would not work. The following is a SBF that was created by extracting some files
(boot.img, cdt.bin, mbm.bin, mbmloader_hs.bin, recovery.img) from the .906 ota and placing them in the original .890 SBF file
which now makes it possible for us to SBF back from .906 to .890.
I created a 1-click-sbf.exe to make flashing as simple as possible. The exe when ran will extract files to a temp dir (if needed)
to make it easy for you to delete manually or most window cleaners will clean the temp folder. thus you don't have to
have that much room taken up on your hard drive all the time..when you start the exe it will check the temp folder to see if
the files still remain..if they do it will not need to extract the files thus starting much quicker!
I am not responsible if you brick your phone while using this!
It has been tested and confirmed working...
1-Click .EXE Method:
Download:HERE
PLEASE DONT FORGET TO CLICK THE LITTLE LIKE BUTTON...
1. Download the above file to computer
2. Get a beer
3. If you have a spare battery, or the current battery, make sure it's charged above 50%
(quick unbrick wont run if it's below 50%)
4. When the phone is off, press m+power and scroll down to AP Fastboot.
5. Plug the phone into the computer, make sure you get the USB connected message on the phone.
6. Run the "1_CLICK_SBF.exe" (win 7 users right click on .exe and run as administrator)
7. Let your phone restore and boot.
8. Finish that beer your done..wasn't that easy..
*NOTE:
Once you have successfully sbf'd you will have to reinstall the .906 ota. you can accomplish this one of 2 ways
1. Go to settings/about phone/system updates and follow the steps
2. Download the update from this thread push it to your EXTERNAL sdcard boot your phone into STOCK recovery pwr+x choose install update
====================
[OFFICIAL UPDATE] VZW DROID 3 OFFICIAL 5.7.906 Update
Download: HERE
MOTOFAIL ROOT TOOL ( this is also a 1_click .exe... )
Download: HERE
NEW! SAFESTRAP v3 for DROID 3
Download v3.05 [ 2012-10-17 ]
md5sum: 39b1cd260e00d5d73faa7f27b7e31d25
SAFESTRAP (TWEAKED) v1.08e RECOVERY (NON-KEXEC)
Download:HERE
====================
tomsgt has put together some nice videos on acomplishing all of this. they can be found here:
http://forum.xda-developers.com/showthread.php?t=1872206
====================
Credits:
Q9nap
Hashcode
Redsox985
Psouza4
droidian1441
Ovelayer
PLEASE DONT FORGET TO CLICK THE LITTLE LIKE BUTTON...
YOU MAY NOT COPY OR RE-POST OUR WORK WITHOUT PERMISSION