This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I am running CM 5062 with gold darkedge and I have been experiencing major heat issues. My Droid is consistently heating up to 116 degrees. Any suggestions?
I am running CM 5062 with gold darkedge and I have been experiencing major heat issues. My Droid is consistently heating up to 116 degrees. Any suggestions?
Me thinks the temp is being misreported or you're not at 1.2 Ghz. A Stock, BONE STOCK, Droid will hit 45c religiously when tethering using PDANet. That is at 550Mhz. So either your temp is being reported incorrectly or you have some freakish SoC in that thing that doesn't get hot. I assume you are using SetCPU. If that is the case what is your Power Save Bias set to?
Yeah, 116 isn't too bad, a few days ago I thought it was, but Hook pointed me in the right direction. When I have my phone plugged in to the car and using the GPS it gets up to about 125 degrees or so at 1GHz. It'll be interesting to see it now with the new version of Cyanogen (which runs MUCH better) and the overclocking tweaks I've made.
Me thinks the temp is being misreported or you're not at 1.2 Ghz. A Stock, BONE STOCK, Droid will hit 45c religiously when tethering using PDANet. That is at 550Mhz. So either your temp is being reported incorrectly or you have some freakish SoC in that thing that doesn't get hot. I assume you are using SetCPU. If that is the case what is your Power Save Bias set to?
it could be a false reading... but my powersave bias is 0 at the moment..
the hottest my phone ever got that i noticed was 119* and thats because i left it in my car while out on my boat for 6 hours and it was 94 degrees outside