Help getting SipDroid working.. can't make outgoing calls

[VirtualGeek]

Has anybody successfully got this working on their droid?

Unlimited Free Calling with Google Voice - Google Docs

I read the instructions, followed them to a T, double checked, triple checked. Can't figure out what I'm doing wrong. I can receive incoming calls, but can't make outgoing calls - it hangs up immediately.

Here's a summary of what I did.

1) Signed up at sipgate for phone number, and took note of sipgate credentials

2) added phone number to google voice

3) Signed up at sipsorcery.com. Create new provide called sipgate, used sipgate credentials.

4) Installed sipdroid, configured to logon to sipsorcery account. Confirmed phone rings when calling sipgate number from landline.

5) Copied and pasted the dial plan, configured for my personal GV account username, password, and sipgate phone number.

Confirmed I can receive calls.
Confirmed that sipdroid registers correctly.

Cannot make outgoing calls, like i said, sipdroid immediately hangs up.

Any suggestions?

 

[VirtualGeek]

Anybody?

Or does anybody know anybody who got it working?

 

[xCaldazar]

I'm having a similar problem. I was testing it with xlite before installing to my phone. I can receive calls, but can't send any. It never makes the ringing noise.
I been following this guide from google
Unlimited Free Calling with Google Voice - Google Docs

Heres the dial plan I'm trying to use, the personal info is removed. There was a 2nd one in the guide I was following it had more options. I just wanted to get up and running first though.

# Copyright(c) 2010 Mike Telis

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.

# Click "View raw file" in the lower right for the best copy/paste view

AREA_CODE = ''                  # my area code
GV_USER   = '@gmail.com'   # my GV e-mail address (user@gmail.com)
GV_PASS   = ''          # my GV password
CB_NUMBER = ''          # my 11-digit SIP number (only one)

SPEED_DIAL = {                     # my speed dial numbers
 '1'   => '19879879876',          # Mom
 '123' => '12345678901',          # Work
 '45'  => '17479876543',          # Gizmo BFF
 '411' => '8004664411',           # Google 411
 '266' => '4153767253@podlinez.net',     # CNN Headlines
}

begin
   sys.Log "** Call from #{req.Header.From} to #{req.URI.User} **"

 if sys.Out    # if outbound call
   num = req.URI.User.to_s        # Get a string copy of the number to dial

   num = SPEED_DIAL[num] || num   # Substitute with speed dial entry, if any

   case num
     when /@/ then sys.Dial num   # URI dialing
     when /^[2-9]\d{6}$/          # Local call, 7-digit number
       num = '1'+ AREA_CODE + num # prefix it with country and area code
     when /^[01]?([2-9]\d{9})/    # US number with or without country code
       num = '1' + $1             # add country code and truncate number to 10-digit
     when /^(011|00|\+)(\d{10,})/ # international number
       num = '+' + $2             # GoogleVoiceCall works with '+' prefix only


     else sys.Respond 603, 'Wrong number, check & dial again'
   end

   sys.Log "Calling #{num} via Google Voice"
   sys.GoogleVoiceCall GV_USER, GV_PASS, CB_NUMBER, num, '.*', CB_NUMBER =~ /^1747/ ? 7 : 1, 30

 else          # sys.Out
   sys.Dial "#{sys.Username}@local"
 end

rescue
 sys.Log("** Error: " + $!) unless $!.to_s =~ /Thread was being aborted./
end

This is my call log, but the outgoing never actually go out. Maybe there is an error code that makes sense to someone else?
*REMOVED* Wasn't any help, showed phone number

Not meaning to thread hijack, but it sounds like we have the same/similar problem. So hopefully my info can help you too.

 

[xCaldazar]

I got it working, although on not totally sure how. I kept going through steps 17-22 from the google guide. Shoot I retested it and for some reason it stopped functioning again. WTF its driving me crazy.

It looks like if I'm still logged into SIP Sorcery I can't make calls out. I need to close the page or logout beforehand. That would have been a handy tip to know. >=(