Kernels

[TeeJayTM]

Sorry for the dumb question but what kernels are compatible with this ROM?

Sent from my Droid using Tapatalk

 

[TMYINC]

Sorry for the dumb question but what kernels are compatible with this ROM?

Sent from my Droid using Tapatalk

Im using Slayher's kernels right now and they work great! They are my kernel of choice. I usually stick with 1.0ghz or 1.1ghz which are blazin' fast. Sometimes I use Chevyno1 or P3droid which are also very good. But Slayher has been the only kernel I have use with MIUI so far and have had no problems. I usually only use standard voltage but Im sure you could use low voltage too. If you have any other question don't hesitate to ask. Hope this helps.

 

[yakitori]

use chevy 0.8 ghz lv kernel and its fast. The slots are awesome. Battery life was great today, although I didnt use my phone much while working. I had 18 hours use and 40 percent charge left. It has seemed to help some since the 7 slots are 125, 250, 400, 550, 600, 700, 800

I o/c to 800 for regular use, which is as high as I go. There is no performance difference for my phone in running it higher...so I see no point in it other than to say "hey I got a 1400+ quadrant" Which...not to get into it, but...is not a valid way to judge performance. My typical qs is 1050-1100 oc to 800 mhz. My phone performs extremely well, and I dont care for the heat that comes with higher speeds (and my phone freezes at anything higher than 1.0 ghz...so I see no need to push it to its limit everyday)

I use all the slots except the 250 using set cpu and profiles.

I like chevy kernel due to the temp monitoring in setcpu. And chevy kernels are awesome (as is his roms for that matter.)