New screen and digitizer and now won't boot past "DROID" screen?

[robisc]

I have replaced 2 Bionic digitizers on phones in the past with good results, though the Bionic in question was working fine with just with a cracked screen, now after 3 different screen/digitizers (thinking the first 2 may be bad) I can't get the phone to boot past the DROID screen (after the Red ball screen), I have tried recovery, wiped data, cache and everything else I know to do, I have used RSD lite to flash multiple different images, all seeming successful until boot up time and don't know what else to do, I think one problem (if it isn't hardware) is the fact that I don't know what version of Android this phone was running, any suggestions? Thanks in advance.

 

[geekabilly]

You need to head over here to Obsidian's Bionic page

Download the 6.7.246 FXZ and flash with RSD Lite -- that is the current version

 

[robisc]

You need to head over here to Obsidian's Bionic page

Download the 6.7.246 FXZ and flash with RSD Lite -- that is the current version

Thanks for the reply, I have flashed that one twice both times with the same results, it won't boot past "DROID"

 

[geekabilly]

That must be a hardware issue then --