P3 kernel not working at 1ghz

[ucpro]

before I installed it, I had a full battery, but when I installed it, my notification light comes on red, and my battery was at 0 with no way to charge it..

I got the kernel through rom manager, has anybody else had this issue?

 

[Chazdel]

yes same thing...I have been looking for a faster kernel that works with CM6 also and tried also with Rom Manager

 

[CxanDroid]

Before you try, you should download several kernels, so you can try until you find one that works.

Despite reading that the chevy kernels don't have a good success rate on CM6, I knew that the 1.2 ULV has worked great on all my previous roms, so I tried it, and it works great.

You just never know what will work with what.

 

[ucpro]

Before you try, you should download several kernels, so you can try until you find one that works.

Despite reading that the chevy kernels don't have a good success rate on CM6, I knew that the 1.2 ULV has worked great on all my previous roms, so I tried it, and it works great.

You just never know what will work with what.

which one is a ulv

 

[CxanDroid]

ULV = Ultra Low Voltage, probably the least likely to be stable if ones processor is 'picky'.

The officially recommended kernel for CM6 is P3, so just try a few of them.

 

[hiphopvenom]

Is it doing that cuz youre flashing a 2. 1 kernal... you need p3's froyo kernal...

P3Droid Kernels

 

[budmonster]

What kernels do work on CM6 RC1 besides P3Droid Kernels?

I've been having a hard time finding compatible kernels, not all 2.2 kernels are working. If anyone can write up a quick list or ones that do work I'd be forever grateful!

 

[hiphopvenom]

Jdlfg kernals will also work

 

[andrew149]

chevys ulv1.2ghz works great for me

 

[ravichopra]

+1 on try a bunch. Every Droid seems to work differently here.
All of Chevy's put me in a M-logo boot-loop (reports of crazy speed with these kernels led me to spend WAY more time than was rational trying to get them to work). P3's work, but I don't get good battery life. I've settled (for now) on jdlfg's 1 GHz 7 slot for CM6 specifically. Working well so far. I think bekit has a test froyo kernel out there as well.

 

[Chazdel]

I had the same problem and someone told me about the ChevyNo1 kernel and it worked on CM6 it is the ulv1200 for froyo...it has been working great

 

[hookbill]

I use a low voltage 125/1100 kernel from P3 on my Droid and it works fine at 1 GHZ.

Not knocking Chevy's work, I hear he has great kernels too. I'm just happy with what I have.