Hi all!
I've been trying to restore my Version S4 to the stock "ME7" system using Odin. I was running a safestrap based ME7 rom until I decided to restore.
I'm confident I have the correct firmware file, and USB drivers.
When I attempt to flash, the Odin log says:
I researched that error, and it suggested using the pit file, so I tracked down this and put it in the Pit slot:
Not really sure what's going wrong. I've also tried firmware files from a few different sources, as well as different USB cables and computers to flash from. Any ideas? Thanks!
I've been trying to restore my Version S4 to the stock "ME7" system using Odin. I was running a safestrap based ME7 rom until I decided to restore.
I'm confident I have the correct firmware file, and USB drivers.
When I attempt to flash, the Odin log says:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I researched that error, and it suggested using the pit file, so I tracked down this and put it in the Pit slot:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Not really sure what's going wrong. I've also tried firmware files from a few different sources, as well as different USB cables and computers to flash from. Any ideas? Thanks!
Last edited: