D2G Liberty... ''Benchmark"

[Swirly]

i ran a benchmark on my phone after installing Liberty on my D2G... the results where low but when i ran then on Fission they where thru the roof!:icon_eek:
Could any1 help me get my D2G back up to speed... or what am i missing??

 

[Masamichi7]

Liberty actually is a bit of a "heavier" ROM than Fission. Luckily, Liberty is easier to customize and overclock. Maybe someone with better advice could chip in. But I wouldn't be too concerned unless your Quadrant is less than 1450 or something.

Sent from my DROID2 GLOBAL using DroidForums

 

[13th angel]

Benchmarks dont really mean anything.....

 

[Zog]

I remember higher scores on liberty 1.5 - Gingerbread didn't speed anything up for me. I'm getting about 2k at 1.3ghz high voltage. I run my phone at 1.2ulv in the 1800's.

 

[Masamichi7]

13th is right though, its more important for your phone to have less lag and feel smooth, than it is for it to have high scores. And personally, I felt Liberty 1.5 ran a little quicker and used less battery than 2.0.1 did.

Sent from my DROID2 GLOBAL using DroidForums

 

[Zog]

I agree with u there. Apex 2.0 gave me considerably better scores. But had a lot of the lag and stuttering to anything I did.

 

[keolawills]

I was getting scores above 2300 with fission and lots of lag, now I get 2k with angelrom and its suuuuuper smooth and way better batt life.

my ANGEL blacked out

 

[Masamichi7]

Wow...the highest I've ever gotten on this thing was 1690 with both the Fenom ROM and Liberty 1.5.

Sent from my DROID2 GLOBAL using DroidForums

 

[bdsullivan76]

If your looking to up your scores you need to enable stagefrieght. It will cause your media player to force close if you enable it w/media. I thought the scores we're great but never seen much of an actual performance change.

Sent from my DROID2 GLOBAL using DroidForums

 

[Swirly]

So what about setcpu or Jrummy overclocking. Do y'all have that??

Sent from my DROID2 GLOBAL using DroidForums

 

[clouse2013]

So what about setcpu or Jrummy overclocking. Do y'all have that??

Sent from my DROID2 GLOBAL using DroidForums

I

I use SetCPU. JRummy's overclock is good too tho. I had that before but had a few problems because its for 4 speed processors and since i have the global, its a 5 speed processor. If you have a Droid2 and not a global, either will work just fine.

 

[13th angel]

I use JRummy's and dont have any problems with it. True, you only get to change 4 slots rather than 5 but still, you can actually change voltages/speeds where you cant using SetCPU.

 

[clouse2013]

I use JRummy's and dont have any problems with it. True, you only get to change 4 slots rather than 5 but still, you can actually change voltages/speeds where you cant using SetCPU.

What advantages do you get from changing the voltages?

 

[13th angel]

Less battery drain because it requires less power.

 

[kickyindahead]

i use milestone overclock and it seems to work just fine .. oc'd at 1.35 and runs smooth with angelicchaos.