Please help URGENT!!

[furbearingmammal]

http://www.droidforums.net/forum/dr...-using-rsd-lite-flash-sbf-file-correctly.html

The SBF you'll want to use is this one:
http://rzdroid.com/ftp/recovery/RZR-2.0.3-recovery_only.sbf

Taken from here:
http://www.droidforums.net/forum/ra...-based-update-zips-battery-charging-more.html

 

[aesor]

Alright so i just flash the sbf file and then what reboot and im fixed?

 

[furbearingmammal]

No, you flash that SBF file, boot into recovery, and then attempt a factory reset/restore/whatever. Having it plugged into a computer or wall charger will allow it to charge in recovery, meaning if the problem is based on battery strength (anything less than 70% is BAD for flashing/restores/etc) this will prevent further issues.

If you want to go back to stock and start over then I can get you a good SBF for that, too.

 

[aesor]

alright im gonna try it right now
it wasnt a battery issue cause it was at 100 percent though
By the way thank you for helping me out i really appreciate it

 

[furbearingmammal]

No problem. But this will make sure that it doesn't BECOME a problem, at least

 

[aesor]

alright well in step 2 it says to trun off my phone but i cant unless i take out the battery
and im just stuck on the M logo
I do hear the device insertion tone on windows though but im just stuck at the motorola logo and i cant power it off unless i take out the battery

 

[furbearingmammal]

So pull the battery, slide out the keyboard, press and hold up on the d-pad, pop the battery back in, and keep holding the d-pad till it boots into the bootloader. Then close the keyboard, pop the back on again, then slide out the keyboard so you can catch the boot and start flashing.

 

[aesor]

alright it worked,i tried flashing and the result says fail,maybe cause i cant see anything on my phone,but i connected it blindly at first lol and it says im connected on rsd lite,i flashed it though but it said fail

 

[furbearingmammal]

If it's saying fail then there's a good chance your phone has suffered a major hardware fault.

Were you tethering at the time you put the phone down or did you overclock the phone at all?

 

[aesor]

yeaah man its saying fail,unable to retreive initialization values from INI file(0x7029; phone connected)
No not at all it was at stock liquid gingerbread 1.3
What can i do if its hardware failure? =T
im thinking its the end right?

 

[furbearingmammal]

Does Liquid Gingerbread have built-in overclocking?

What version of RSD Lite are you using?

 

[aesor]

i was using 4.5 or sumthing, i read that it had to be 4.6 now i tried to install the 4.6 and it says install failed, so im trying to find it in other places to install it

 

[furbearingmammal]

You HAVE to have 4.6 and up to flash on the Droid. http://ted.servepics.com/nap/droid/RSDLite4.6.msi


http://ted.servepics.com/nap/droid/RSD Lite 4.9.msi That's 4.9 if you can NOT get 4.6 to work.

 

[aesor]

alright it worked it says please manually power this phone

 

[aesor]

should i disconnect it take the battery out and turn it on andsee what happens or?