This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I put some electrical tape inside the back cover to solve the creaky issue. My creakiness was right under the camera cutout, made a creak when I pressed on it, which is right where my finger sits when holding it. I looped some electrical tape to be about 5 pieces thick and stuck it in there. I did the same thing right in the center and everything seems to be fine now. Maybe a slight creak at the bottom, but I can't even tell now with the case on. Problem solved.
I put some electrical tape inside the back cover to solve the creaky issue. My creakiness was right under the camera cutout, made a creak when I pressed on it, which is right where my finger sits when holding it. I looped some electrical tape to be about 5 pieces thick and stuck it in there. I did the same thing right in the center and everything seems to be fine now. Maybe a slight creak at the bottom, but I can't even tell now with the case on. Problem solved.
I just bought a roll of electrical tape. Cut about six one inch strips and stuck them to the case back on top of one another. They are centered around the middle of the battery.
Small annoyances... I would have loved to have been in the production meetings with a tazer so I could zap a few engineers... however these are not deal breakers IMO.