The cm4dx 1% battery fix is making the rounds
The cm4dx 1% battery fix is fine for cm7, not for SSX.
It will break your ChevyNo1 tools (happened to a couple folk over at DXF)
Cool, thanks Chevy
Update
For those that want the workaround, to make use of the 1% solution
1. Copy your build prop from /system to sd card
2. Add the following, without quotes, to the build prop you pulled:
"ro.product.use_charge_counter=1"
3. Flash Razorloves 1% solution
4. Copy the sd card build prop and paste to overwrite /system/build.prop with it
5. Reboot and you have the 1% solution and chevyno1 tools
Update 2: To get the 1% (not 5) solution in your status bar (thanks kc5tdr)
Go to Settings>CyanogenMod Settings>Interface>Status bar tweaks>check battery percentage
This gives 1% increments in the status bar
The cm4dx 1% battery fix is fine for cm7, not for SSX.
It will break your ChevyNo1 tools (happened to a couple folk over at DXF)
Cool, thanks Chevy
Update
For those that want the workaround, to make use of the 1% solution
1. Copy your build prop from /system to sd card
2. Add the following, without quotes, to the build prop you pulled:
"ro.product.use_charge_counter=1"
3. Flash Razorloves 1% solution
4. Copy the sd card build prop and paste to overwrite /system/build.prop with it
5. Reboot and you have the 1% solution and chevyno1 tools
Update 2: To get the 1% (not 5) solution in your status bar (thanks kc5tdr)
Go to Settings>CyanogenMod Settings>Interface>Status bar tweaks>check battery percentage
This gives 1% increments in the status bar
Last edited: