[ROM] [6/18/12] CM9 ICS For the Droid Pro

[Compressor]

FYI, while I got it to build properly with just D2G sources, and loaded it and it's working on my DP, if you mess up you will have to SBF as it doesn't have the boot menu from JC. I am still struggling figuring out how to use his device/vendor info. JC's builds flash a blue LED on boot, then you can press up/down vol and it goes to a recovery menu. D2G does not have this, instead you have to be fully booted then press reboot and select recovery.

If you try and can figure out how to build JC's stuff in please let me know. I got it to start compiling but it would bail out.

you can try to put in your rom dettofatto bootloader (this bootloader have a led blue like jackpot bootloader, and have a overclock mode)
for install this you can install this zip file with droid 2 bootstraper...you can try
http://db.tt/KquOcVxE

 

[mortimermax]

thanks! i knew i saw a flashable zip like that somewhere before but couldn't find it.

 

[mortimermax]

you can try to put in your rom dettofatto bootloader (this bootloader have a led blue like jackpot bootloader, and have a overclock mode)


for install this you can install this zip file with droid 2 bootstraper...you can try
http://db.tt/KquOcVxE

after installed, do you know the proper setting to make it boot normally if you don't press volume keys? by default it loads that screen every time. Normal boot is apparently not correct as I am stuck with Motorola logo

Actually none of the options work with this bootloader for me with CM9, tried Normal, 2nd-init, and 2nd-boot.
Oh well.

 

[Compressor]

after installed, do you know the proper setting to make it boot normally if you don't press volume keys? by default it loads that screen every time. Normal boot is apparently not correct as I am stuck with Motorola logo

Actually none of the options work with this bootloader for me with CM9, tried Normal, 2nd-init, and 2nd-boot.
Oh well.

[TUT] BOOT Menu and Overclock Droid (1200Mhz) pro (all) - xda-developers

you can see all option of bootloader :biggrin:

 

[mortimermax]

[TUT] BOOT Menu and Overclock Droid (1200Mhz) pro (all) - xda-developers

you can see all option of bootloader :biggrin:

According to that thread, that application will not work with devices that are running roms with builtin or existing recovery. So doesn't work with CM7 or CM9.

 

[Compressor]

According to that thread, that application will not work with devices that are running roms with builtin or existing recovery. So doesn't work with CM7 or CM9.

it's not possible remove the bootloader build in cm7 and replace with this?

 

[JackpotClavin]

Might be the differences in the updater script. /system/bin/logwrapper should he symlinked to bootmenu. If you are using the d2g source, it is probably symlinked to hijack instead of bootmenu

 

[mortimermax]

My ultimate goal is just to build however you are JackpotClavin but with pdroid patches in it. I'm running a stright d2g build right now with pdroid, but I'd much prefer how you have your rom set up. I just don't know what process to use to merge your source and d2g into one properly.

 

[mortimermax]

[TUT] BOOT Menu and Overclock Droid (1200Mhz) pro (all) - xda-developers

you can see all option of bootloader :biggrin:

BTW, here is the bootloader zip file we need for our device, Goo.im Downloads - Downloading HijackedBootmenu_CM9_1.1.5.zip
That's working like a charm for me.

 

[Compressor]

BTW, here is the bootloader zip file we need for our device, Goo.im Downloads - Downloading HijackedBootmenu_CM9_1.1.5.zip
That's working like a charm for me.

you can create a bootloader based on dettofatto bootloader for the cm7?
thanks a lot!

 

[Spectacle.Guru]

Might be a silly question but I just started using Windows again after a long stint of nothing but Linux and can't get the PC to recognize USB mode on my Droid Pro. Linux always just saw it, Win 7 and even the Win 8 preview refuse to see it. I'm sure there is an easy fix but having difficulty finding it.

 

[aiamuzz]

Wondering how is desterly's HWA ROM coming thru ... is t happening ?

JC, any chances u can incorporate the HWA into your current ROM ...

--- Sent from my DROID Pro ---

 

[ttrevorr]

Wondering how is desterly's HWA ROM coming thru ... is t happening ?

JC, any chances u can incorporate the HWA into your current ROM ...

--- Sent from my DROID Pro ---

Second this.

 

[regedit]

Guys its been ages. What's the new on the release?

Sent from my DROID Pro

 

[ttrevorr]

I really hope that this project is not dead...