DroidForums.net | Android Forum & News
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Downgrade to 902 - No app or data loss
- Thread starter SamuriHL
- Start date
Next time, seriously, ask for the server it was found on. Yo people that don't read. I pulled RSD 6.14 for a reason. Those who didn't pay attention and are now getting AP Fastboot failures cause it didn't flash properly should pay attention for one, and second you're going to have to do the following:
Install RSD 5.7
Boot into AP Fastboot manually
Skip to the RSD flash step and start from there
Install RSD 5.7
Boot into AP Fastboot manually
Skip to the RSD flash step and start from there
Beefloafian
New Member
Ok, now I'm angry, put tablet next to my keyboard and it xed out my 20 minutes of writing down EVERYTHING I've been trying to do on here.
sigh, here's the SWDL
10/01/12 20:57:05 --------------------------------------------------------------------------------
10/01/12 20:57:05 New Log Started For Software Download.
10/01/12 20:57:05 The FlashLog key is turned off.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1823 0 ERROR GetSoftwareVersion failed: SendTC failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1981 0 ERROR GetSoftwareFlexVersion failed: ReadSeemElement failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1951 0 ERROR GetBootVerFlashMode failed: SendTC failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1870 0 ERROR GetDRMVersion failed: SendTC failed: ERROR.
10/01/12 20:57:08 Multi upgrade started for 1 phones
10/01/12 20:57:08 [Device ID: 0] 1/6 flash system "system.img"
10/01/12 20:58:54 [Device ID: 0] 2/6 flash boot "boot.img"
10/01/12 20:58:56 ERROR: 2/6 flash boot "boot.img" -> Phone returned FAIL. - on device ID 0.
10/01/12 20:58:56 [Device ID: 0] 2/6 flash boot "boot.img" -> Phone returned FAIL.
10/01/12 20:58:56 ERROR: Failed flashing process. - on device ID 0.
10/01/12 20:58:56 Multi upgrade finished.
so I'm having trouble with the flashing of 232 onto the phone during the whole process, yes I've read everything in the OP and FAQ, followed everything, double checked everything... and I get an error when it verifies the update. and installation aborted. do you want to see that whole error? (it's a b***h to type out...don't really want to again)
did being originaly on [ICS AOSP ROM] "AOKP" (Android Open KANG Project) for BIONIC [2/20/2012] - Droid Bionic Development - RootzWiki have anything to do with it? I uninstalled safestrap on the unsafe side and let the phone OTA to 905 first. busyboxed and motofailed the 905.
I'll run through another flash attempt and get that error message and start typing it out, it might be done by the time you finish reading this....
Thanks in advance
sigh, here's the SWDL
10/01/12 20:57:05 --------------------------------------------------------------------------------
10/01/12 20:57:05 New Log Started For Software Download.
10/01/12 20:57:05 The FlashLog key is turned off.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1754 0 ERROR GetTechnology failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1823 0 ERROR GetSoftwareVersion failed: SendTC failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1981 0 ERROR GetSoftwareFlexVersion failed: ReadSeemElement failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1951 0 ERROR GetBootVerFlashMode failed: SendTC failed: ERROR.
10/01/12 20:57:08 00001610 Phone.cpp 518 0 ERROR Generic failure when sending command.
10/01/12 20:57:08 00001610 Phone.cpp 1870 0 ERROR GetDRMVersion failed: SendTC failed: ERROR.
10/01/12 20:57:08 Multi upgrade started for 1 phones
10/01/12 20:57:08 [Device ID: 0] 1/6 flash system "system.img"
10/01/12 20:58:54 [Device ID: 0] 2/6 flash boot "boot.img"
10/01/12 20:58:56 ERROR: 2/6 flash boot "boot.img" -> Phone returned FAIL. - on device ID 0.
10/01/12 20:58:56 [Device ID: 0] 2/6 flash boot "boot.img" -> Phone returned FAIL.
10/01/12 20:58:56 ERROR: Failed flashing process. - on device ID 0.
10/01/12 20:58:56 Multi upgrade finished.
so I'm having trouble with the flashing of 232 onto the phone during the whole process, yes I've read everything in the OP and FAQ, followed everything, double checked everything... and I get an error when it verifies the update. and installation aborted. do you want to see that whole error? (it's a b***h to type out...don't really want to again)
did being originaly on [ICS AOSP ROM] "AOKP" (Android Open KANG Project) for BIONIC [2/20/2012] - Droid Bionic Development - RootzWiki have anything to do with it? I uninstalled safestrap on the unsafe side and let the phone OTA to 905 first. busyboxed and motofailed the 905.
I'll run through another flash attempt and get that error message and start typing it out, it might be done by the time you finish reading this....
Thanks in advance
Delasangre4231
Member
Oh wow, .247, that sucks. So what was that deal about 1% battery mod breaking something? Can I safely update to .247 with the 1% installed?
I really hate 232. Seriously I don't like it. Ok, rename the boot.img in the 232 directory. Just rename it to boot.img.232 or something. Then copy the boot.img from the 905_FXZ folder and put it into the 232 directory. Run it again. If it doesn't work, I'll need the swdl.txt again (sorry).
It's fine. You'll lose the mod, but, the reason it didn't work before is cause you had RSD 6.14 and it was failing to flash.
sargentmajord
Silver Member
SamuriHL said:
Just use a regular fxz an side load 247
Sent from my 1.404 ghz 3605 quadrant score ICS .246 DROID BIONIC
Delasangre4231
Member
Whats wrong with 6.14? I used that to install .246 and everything went great. I will try it again with .247 and see what happens.
Not necessary. And they're trying to install 232. They just need to do what I said.
Don't say I didn't warn you. When it fails, DO NOT ask me what to do....I'm not really in the mood.
Beefloafian
New Member
if you hate it that much, should I not flash it? just go right to 247 or such? I really just want an ICS rom to safestrap hashcodes jb on.
Delasangre4231
Member
Alright no problem. I think I will use the old version just to be safe but I think I will wait for the weekend because .246 is running so well with insanely good battery life lately.
No, it's a fine build. And is still the safest ICS build. My issue with it is in how it installs. Their boot img doesn't seem to want to flash properly when on 905. It's the only build that does that. I have NFI why. Just do what I recommended and you'll be golden.