[APPS] Droid X/2 Overclock App - Easy & Noob friendly ;)

[henryhu6]

Voltages

Does anybody know what the voltages are for Ultra low, low, high? He did say what the voltages are for stock in the help.

Also, can I run at below 200Mhz to save battery when the screen is off? Will that make the phone unstable?

 

[ab2388]

I tried running the app on my Droid X but whenever I try to set scaling frequencies, after a while, my phone says that the app is not responding and gives me an option to force close or wait. I currently have the stock rom, is that the problem?

Thanks!

 

[LordShadowz]

I tried running the app on my Droid X but whenever I try to set scaling frequencies, after a while, my phone says that the app is not responding and gives me an option to force close or wait. I currently have the stock rom, is that the problem?

Thanks!

Did you install Busybox ?

Did you try different frequencies ? Is it happening everytime even with other frequencies ?

I am getting into all the hacking now and going slow.. I can tell you the overclocker app runs absolutely fine on my X.

 

[sxlxaxvxexn]

Works great on mine running 1.25 lv, will try to go higher later.

 

[humungus]

So, has anyone been able to get custom settings to load at boot?

 

[canvs2321]

So, has anyone been able to get custom settings to load at boot?

pretty sure, without asking that u&me=custom settings, as we think alike

anywho what settings are you using?

 

[ab2388]

I do have busybox installed. I have tried on several low frequencies and voltages and it stops responding for all. Any ideas?

Thanks!

Sent from my DROIDX using DroidForums App

 

[humungus]

So, has anyone been able to get custom settings to load at boot?

pretty sure, without asking that u&me=custom settings, as we think alike

anywho what settings are you using?

I'm not entirely sure what you're saying, sorry. I can't get a custom preset to load at boot. It works fine when I initially run it, and when I run it manually after a reboot, but it doesn't autoload at boot like it should. Everyone else here seems to be running the hardcoded presets, so I was asking if anyone has been able to successfully get custom presets to load at boot.

My custom settings, by the way, are as follows:

1000 at 52
800 at 44
600 at 33
300 at 20

Also, in case anyone else hasn't noticed, the hardcoded presets which are supposed to be stock frequencies aren't stock. Stock is as follows:

1000
800
600
300

but the "stock" presets in the program are:

1000
800
500
350

It's not a big deal, but it might causes issues under certain circumstances.


EDIT: So I've been running rubiX 1.0 (fission base) but I just tried this app on rubiX blurry (stock /system base), and custom presets don't survive a reboot on it either. Anyone _not_ having this problem???

 

[hyperlite]

Jrummy I just gotta say this app gets better and better nearly every day. Keep it up.

Sent from my DROIDX using Tapatalk

 

[hyperlite]

So, has anyone been able to get custom settings to load at boot?

pretty sure, without asking that u&me=custom settings, as we think alike

anywho what settings are you using?

I'm not entirely sure what you're saying, sorry. I can't get a custom preset to load at boot. It works fine when I initially run it, and when I run it manually after a reboot, but it doesn't autoload at boot like it should. Everyone else here seems to be running the hardcoded presets, so I was asking if anyone has been able to successfully get custom presets to load at boot.

My custom settings, by the way, are as follows:

1000 at 52
800 at 44
600 at 33
300 at 20

Also, in case anyone else hasn't noticed, the hardcoded presets which are supposed to be stock frequencies aren't stock. Stock is as follows:

1000
800
600
300

but the "stock" presets in the program are:

1000
800
500
350

It's not a big deal, but it might causes issues under certain circumstances.


EDIT: So I've been running rubiX 1.0 (fission base) but I just tried this app on rubiX blurry (stock /system base), and custom presets don't survive a reboot on it either. Anyone _not_ having this problem???

Update came out today... 1.2.5



Sent from my DROIDX using Tapatalk

 

[hyperlite]

Does anybody know what the voltages are for Ultra low, low, high? He did say what the voltages are for stock in the help.

Also, can I run at below 200Mhz to save battery when the screen is off? Will that make the phone unstable?

I would be interested to know this as well


Sent from my DROIDX using Tapatalk

 

[rcjames]

Well, I got my Droid X 3 days ago and have worked non stop (besides normal work + school :-/ ), and I am happy to bring you Droid X/2 Overclock.


Droid-Life Article

Currently you can Choose to set your frequencies at boot and in real time. It's just as good as an instant kernel installer to get your custom frequency and voltage whenever you want, instantly.

Check it out on the market or GET IT HERE

This is just the beginning, more customization to come as an advanced option and more extras are in the works


# Credits:
# Tiago Sousa aka Mirage: for The Milestone Overclock Project
# nadlabak: for patching in Froyo/2.2 Support
# FreeWELL: for finding DroidX 2.2 memory locations/module compilation

Hi on my dx the bar underneath say authorizing purchase and its not downloading because its waiting for it. Whats wrong? paypal id
jcer93705@hotmail.com

 

[humungus]

Update came out today... 1.2.5



Sent from my DROIDX using Tapatalk

I've been running the update since yesterday morning; no dice. Can you check and see if you custom presets will survive a boot?

 

[humungus]

For anyone wanting to know the voltage of the presets you can either open up /data/data/com.jrummy.../dxsetup.sh (I think that's what's it's called) and find the preset you're interested in. Or you can open up terminal and run

su
cat /proc/overclock/mpu_opps



Sent from my DROIDX

 

[djsiva]

I know I had the interactive governor on my D1 2.2, but I don't see it on the DX. Is this how it's supposed to be?

Thanks!